Luoyang HongtengIntermediate frequency induction furnace
Warmly celebrate on the delivery of 15 Tons furnaces for Africa customer, 4 sets one time!
When using an intermediate frequency furnace for smelting, energy can be effectively saved through smaller techniques. For example, when casting, do not empty all molten iron, but leave a proper amoun
1. Install a plate of steel wire and cover the tank lid,Seal the mouth tank cap with sand, then cover the furnace cover .2. The tank heated up to 870 degrees, about 3 hours, and high temperature for 6
Power is approximately 160kw, using 900 degreesSupporting heat resistance tank is made of 8 thick stainless steel plate, and the furnace cover is also made of stainless steel hot pressure furnace cove
Continuous casting can be divided into two ways: mixing furnace casting and external casting. Continuous casting machines are used. Mixing furnace casting is to pour liquid aluminum into the mixing fu
The casting process of aluminum ingot adopts liquid aluminum injection mold. The injection process is the key step of product quality after cooling into casting billet and taking out.The casting proce
Induction melting steel furnace
Closed water cooling tower
Mini rolling mill production line
Billet heating furnace
Induction aluminum melting furnace
Open water cooling tower
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2020 Luoyang Hongteng Electrical Equipment Co., Ltd.All Rights Reserved. Powered by MetInfo